ET freezing and crashing problems and solutions in working1

[>rob><]

ET freezing and crashing problems and solutions in working:

Part1

problems with crashes: i play for 30mins or less on PB servers/then crash and have to reboot.

reinstalled xp and wipe system clean----- (problem still persists)

crashes after 30 mins or so.

02/09/2008 06:17 Application Error Faulting application et.exe, version 0.0.0.0, faulting module et.exe, version 0.0.0.0, fault address 0x00027ab4.

02/09/2008 06:18 Application Error Faulting application et.exe, version 0.0.0.0, faulting module et.exe, version 0.0.0.0, fault address 0x00027ab4.

02/09/2008 06:25 Application Error Faulting application et.exe, version 0.0.0.0, faulting module et.exe, version 0.0.0.0, fault address 0x00027ab4.

02/09/2008 19:07 Application Error Faulting application et.exe, version 0.0.0.0, faulting module nvoglnt.dll, version 6.13.10.3150, fault address 0x000d177e.

02/09/2008 19:08 Application Hang Hanging application ET.exe, version 0.0.0.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

found these error messages in error logs.

found this site to related problems many people have the same.

http://www.punksbusted.com/forums/index ... 8804&st=20

my system info :

My Computer Information - General

100% (collecting Local Disk information)

Refresh screen

Specifications

P4VM8

System Model: P4VM8

BIOS Version: American Megatrends Inc. P1.00

Operating System

Microsoft Windows XP Home Edition

Version: 5.1.2600

Service Pack: 3.0

Location: C:\WINDOWS

PID: 55277-OEM-0040467-95559

Hot Fix: KB953839

Memory (RAM)

Capacity: 511.23 MB

Processor

Intel® Pentium® 4 CPU 3.06GHz

Version: x86 Family 15 Model 2 Stepping 7

Speed: 3066 MHz

General Computer Info

System Name: ROB

Domain: WORKGROUP

Time Zone: GMT Standard Time

Connection: Workstation (standalone)

Proxy Server: Auto

IP Address:

IPX Address: Not Enabled

Local Disk

Total Capacity: 111.80 GB

Sum of Hard Disks: (C: )

Used: 11.93 GB

Free: 99.87 GB

Plug and Play Monitor and NVIDIA GeForce4 MX 440..... update this driver. no effect in fact when i did using windows-update, it gave me and open_gl problem which blocked access into ET completely, great help that was so unrolled the update.

--------------------------------------------------------------------

My Computer Information - Status - everything good and working properly.

--------------------------------------------------------------------

found this site also for pb refrence:

http://www.evenbalance.com/index.php?pa ... ort-et.php

(23:36) still freezing up, found this:

unistalled PB and reinstalled: didnt work. so carried on reading here:

http://www.punksbusted.com/forums/index ... 8804&st=20:

which basically says i have to get a evenbalance ticket from here:

http://www.evenbalance.com/troubleticke ... hp?game=et

(which takes ages to respond) hmmmmmmmmmmmm

--------------------------------------------------------------------------

i also got this: as my comp was asking for RAID Controller software and coulnt find it itself.

http://www.punksbusted.com/forums/index ... topic=6249

Silicon Image Sil 3x12A SATA RAID:

Installing this driver will fix the issue. Note that it is just for RAID controller.

Adding the SiI RAID controller to an existing Windows 2000/XP installation

---------------------------------------------------------------------------

Follow the instructions in this section to install the Silicon Image

SiI 3112 driver on a system already running Windows 2000.

1. Power off the system. Connect the hard drives to the SiI 3112

controller and insert the controller into a PCI slot. Power up

the system.

2. During OS boot up, Windows 2000 will display the

'Found New Hardware Wizard'. Click 'Next'.

3. Select 'Search for a suitable driver for my device

(Recommended)' and Click 'Next'.

4. Under 'Optional search locations' insure that 'Floppy disk drives'

is checked.

5. Insert the diskette labeled ' Silicon Image SiI 3112 SATARaid Driver

Installation Disk' into A: and click 'Next'.

6. When the wizard indicates that it found a driver for the device click

'Next'.

7. If the 'Digital Signature Not Found' dialog appears, click 'Yes' to

continue installing the driver.

8. The wizard will now copy the required files to the system and start the

driver. After starting the driver the wizard will display a completion

dialog, click 'Finish' to exit the wizard.

9. See instructions in section 4 to verify controller was installed

correctly.

-------------------------------------------------------------------------------------------

(for adding raid contolller software to my hardware which is apparently missing)

problem is on step one its asks me to do this:

Connect the hard drives to the SiI 3112

controller and insert the controller into a PCI slot.

I dont know what that means or how to do it any surrgestions?....... when i know how to do this, i can report if it fixed the problem.....

[miraro3]

aw rob...

i get crazy if my keybaord works half, but with ur problem i would go cut myself or somthin

good luck with it

im sure muppet can help you

[MadF.Lame]

HardCore Emo? :roll:

[miraro3]

that aint me

i found in on google maybbe its from a emo site 'www.howtokilmyself.com' r somthin ^^

[Virus]

site 'www.howtokilmyself.com' r somthin ^^

no from http://www.amitbhawani.com/Images/S/sui ... ttempt.jpg

[miraro3]

site 'www.howtokilmyself.com' r somthin ^^

no from http://www.amitbhawani.com/Images/S/sui ... ttempt.jpg

:roll:

[MrMuppet]

Is this sorted Rob?